Kripalu Plywood Kripalu Interio Pvt. Ltd., Kanpur Request a rate

Home  /  Doors  /  Z-on  /  Grooving

Z-on grooving doors in Kanpur

The Grooving series: designs where the pattern is cut into the face rather than pressed into it, in PVC or WPC. Grooves and fine inlay lines, in a flat, modern look, waterproof and termite proof like the rest of the range.

Open Monday to Saturday

Z-on grooving door design PVC / WPC 109 at Kripalu Plywood, Kanpur
images/zon/zon-wpc-09.webpZ-on grooving door

Cut, not pressed.

An embossed door gets its pattern from a die under heat. These get theirs from a cutter following a drawing — straight grooves, arcs and inlay lines, in a flat face rather than a moulded one.

A flatter, plainer face

No raised panels. A line or a groove breaking up a plain leaf, which is what most modern interiors are asking for.

Every door identical

The machine repeats the same drawing on every leaf, so twelve doors on a floor match each other exactly.

Inlay lines in the groove

Several designs carry a fine light-coloured inlay set into the cut, which is what gives them their look against a dark foil.

PVC or WPC

The same grooved designs are made on a PVC leaf or a WPC one. Tell us the room and we’ll say which suits it better.

The cutting happens at the factory

These arrive finished. The grooves are CNC cut at Z-on’s works — we don’t cut, size or profile at the store, and we’ll say so plainly rather than waste your time. See how the leaf is built.

Standard door sizes

Made in widths from 25 to 33 inches and heights from 75 to 89 inches, so most standard doorways are covered. Measure yours and send it with the design.

Grooving or moulded?

The two ranges cost about the same and last about the same. What separates them is the look, and which rooms they suit.

  • For a modern, flat interior: grooving

    Straight lines and grooves sit better next to plain laminate wardrobes and flat wall panelling than a moulded panel does.

  • For a traditional room: moulded

    If the rest of the house has panelled woodwork, an moulded design matches it and a flat grooved leaf will look out of place.

  • For a doorway that gets scrubbed: either

    Both wipe clean. A deep emboss holds a little more dust in the pattern than a shallow groove does, which matters in a kitchen passage.

  • For matching a set of doors: grooving

    When a whole floor has to look like one set, the repeatability of a cut pattern is the safer choice.

  • What we’d ask you

    What do the wardrobes look like, and is this one door or twelve? Two answers and the range usually picks itself.

The grooving designs.

Ten of the grooving designs, shown in sample foils. The catalogue runs further, to PVC-117 — ask us and we’ll show you the rest at the counter. The cut and the finish are separate choices, so pick the pattern first and the shade after, and say whether you want PVC or WPC.

Z-on grooving door design PVC / WPC 101

PVC / WPC 101

Z-on grooving door design PVC / WPC 102

PVC / WPC 102

Z-on grooving door design PVC / WPC 103

PVC / WPC 103

Z-on grooving door design PVC / WPC 104

PVC / WPC 104

Z-on grooving door design PVC / WPC 105

PVC / WPC 105

Z-on grooving door design PVC / WPC 106

PVC / WPC 106

Z-on grooving door design PVC / WPC 107

PVC / WPC 107

Z-on grooving door design PVC / WPC 108

PVC / WPC 108

Z-on grooving door design PVC / WPC 109

PVC / WPC 109

Z-on grooving door design PVC / WPC 110

PVC / WPC 110

Where they go.

Rooms where the doors are meant to read as one set.

New flats and modern interiors

Flat leaves with a groove suit plain modular work better than panelled doors do.

Bedrooms and bathrooms together

One design across a floor, in the same foil, so nothing looks added on afterwards.

Offices and clinics

Plain, repeatable and easy to clean, which is what these buildings actually want.

Wet rooms, like the rest of the range

Same PVC build underneath, so water and termites are no more of a problem here than anywhere else in the range.

Why buy them here.

The same terms for one door as for a floor of them.

Doing a whole floor of doors?

Send the design and the count on WhatsApp. The rate comes back the same day, along with what is on the floor right now.

Get a door rate